Changing Automatic Linkage Mode - Fujitsu ScanSnap Advanced Operation Manual

Changing Automatic Linkage Mode

Change automatic linkage mode options in the following procedure.
1.
Select [Preferences] from the Right-Click Menu.
a The [ScanSnap Manager - Preferences] window appears.
2.
Select the automatic linkage mode in the [Automatic Linkage] tab.
3.
Click the [OK] button to close the [ScanSnap Manager - Preferences]
window.
a The setting is changed to the selected automatic linkage mode.
HINT
To disable automatic linkage, select [Do not link automatically] in the [Automatic Linkage] tab of the
[ScanSnap Manager - Preferences] window.
188
Automatic Linkage with Applications