Optimizing The Image - BenQ GP30 User Manual

Optimizing the image

Selecting a picture mode
The projector is preset with several predefined picture
modes so you can choose one to suit your operating
environment and input signal picture type.
To select an operation mode that best suits your need,
you can follow the following steps.
• Make sure the input source is on computer,
composite video, component or HDMI/MHL mode
and the projection screen is being displayed.
• You may press
Settings and press OK to enter. Select Picture Mode and press
desired mode.
The picture modes are listed below.
1. Bright mode: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
2. Presentation mode (Default): Is designed for presentations. The brightness is
emphasized in this mode.
3. Cinema mode: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
4. Game mode: Is appropriate for playing games.
5. User mode: Recalls the settings customized based on the current available picture
modes. See
Setting the User mode
There is an user-definable mode if the current available picture modes are not suitable for
your need. You can use one of the picture modes (except the User) as a starting point and
customize the settings.
1. Press
2. Press
3. Select Picture Mode and press
4. Press
This function is only available when User mode is selected in the Picture Mode sub-menu.
5. Press
6. Press
See "Fine-tuning the image quality in User mode" on page 36
7. When all settings have been done, highlight Save Settings and press OK to store
the settings.
8. The confirmation message "Setting Saved" appears.
to open the pop-up menu. Press
"Setting the User mode"
to open the pop-up menu.
to select Picture Mode Settings and press OK to enter.
to highlight Reference Mode.
/ to select a picture mode that is closest to your need.
to select a sub-menu item to be changed and adjust the value with
to select Picture Mode
for details.
/ to select User.
/ to select a
/
for details.
Operation 35
.