Table of Contents
Advertisement
Securing the projector
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an
option for setting up password security. The password can be set through the Settings
menu.
You will be inconvenienced if you activate the power-on lock functionality and subsequently
forget the password. Print out this manual (if necessary), write the password you used in this
manual and keep the manual in a safe place for later recall.
Setting power on lock
•
Once a password has been set, the projector cannot be used unless the correct password is
entered every time the projector is started.
•
When setting a password for the projector with its password function being used for the first
time, enter the default password (1, 1, 1, 1, 1, 1) of the projector by pressing the
key six times if you are prompted for a password.
1.
Press
2.
Go to the Advanced > Security Settings > Change Security Settings menu.
3.
Press OK. The message "Input Current Password" appears.
4.
As pictured to the right, the four arrow keys
(
,
(1, 2, 3, 4). Press the arrow keys to enter six
digits for the password.
5.
Once the correct password is set, the OSD
menu returns to the Change Security
Settings menu.
6.
Highlight Power on Lock and press OK. The
pop-up menu appears. Select On and press OK to complete power on lock setting.
7.
To leave the OSD menu, press
If you forget the password
If the password function is activated, you will be asked
to enter the six-digit password every time you turn on
the projector. If you enter the wrong password, the
password error message displays for three seconds,
and the message "Input Password" follows. If you
enter an incorrect password 5 times in succession, the
projector will automatically shut down in a short time.
/
until the Settings menu is highlighted and then press OK to enter.
,
,
) respectively represent 4 digits
or
.
arrow
Operation 31
Advertisement
Table of Contents
