Table of Contents
Advertisement
USB file transfer
You can connect the projector to transfer files from your computer to the projector. The
files will be saved in the internal memory, and you can project images from the projector.
To use USB file transfer:
1.
Connect the projector to a computer using a USB cable.
2.
Turn on the power of the projector and your
source device. The projector displays the home
screen.
3.
Press
/
to select USB Streaming.
4.
Press
/
to select USB File Transfer and
then press OK to enter.
5.
If the connection is successful, you will see "It is
in USB file transfer mode." message on the
screen.
6.
Look for a new "removable disk" icon. This "removable disk" is actually the internal
memory in your projector.
7.
Copy & Paste or Drag-N-Drop files from your computer to the removable disk.
8.
If you want to display those files, use
"Displaying files with internal memory, USB drive and SD card" on page 44
9.
Press
or
To disconnect the projector from a PC:
Make sure to end the connection properly to prevent damage to the projector or your
data.
1.
Click on the Windows Taskbar.
2.
Click the pop-up message.
3.
Disconnect the USB cable only when the message says that it is safe to remove the
hardware.
•
Do not disconnect the USB cable while files are being copied, as this could result in loss of
data or damage to the projector.
•
The connection will not end if you have projector files open on the PC. Close all projector
files and try again.
•
Other versions of Windows operate similarly. Follow the correct procedure for removing a
USB device from your PC safely for your version of Windows.
to leave USB File Transfer mode and back to projector home screen.
/
to select Internal Memory. See
for details.
Operation 57
Advertisement
Table of Contents
