Table of Contents
Advertisement
INSTALLATION
WIRING A GATE OPERATOR (NORMALLY OPEN)
The gate operator can be connected to Relay 1 or Relay 2. See the
Programming section for information about configuring Relays 1
and 2.
WIRING AN AUTO-CALL SENSOR
The Auto-Call feature will enable the unit to contact the resident
when a driveway sensor (or any device that provides a contact
closure) is activated.
NO
(Normally Open)
>> WIRING A GATE OPERATOR (NORMALLY OPEN) AND
WIRING AN AUTO-CALL SENSOR
RELAY 2
RELAY 1
COM
(Common)
Notes about wire connectors
(terminal blocks):
• Wire connectors can be
removed to simplify wiring.
• DO NOT overload wire
connectors. Use ONLY one
wire per hole.
NO
(Normally Open)
7
TEL CO
HOU SE
Primary Gate
Operator
(Strike Open Input)
Loop
Detector
Loop Sensor
Advertisement
Table of Contents
