Directory
The directory can store up to 50 entries, which are shared by all system devices.
Operation
Add an entry
Search/dial an
entry
Save a caller ID
log entry to the
directory
Caller ID
This product supports caller ID services offered by most telephone service
providers. The telephone stores caller ID information of the last 50 incoming calls in
the telephone base. This information is common to all devices.
Caller ID announce
When this feature is on and you have an incoming call, the handset and/or base speaks
"Call from..." and the name of the caller based on the directory or caller ID information.
You can turn this feature off for the base or each individual handset, or both.
1.
->
or
2.
or
-> Caller ID annc -> SELECT.
to choose Set all On/Off, Local handset or Base -> SELECT.
3.
or
4.
or
to choose On or Off -> SELECT.
1.
->
-> Add contact -> SELECT.
2.
or
3. Enter a telephone number up to 30 digits -> SELECT.
4. Enter a name up to 15 characters ->
1.
when the telephone is not in use.
2. Press
or
the dialing keys (0-9) to start a name search.
3. Press
- OR -
On the telephone base, press
corded handset to call.
1.
when the telephone is not in use
browse.
2. When the desired entry displays -> SELECT.
SELECT again to choose Directory.
3.
4. Edit the telephone number, if needed -> SELECT.
5. Edit the name, if needed ->
-> Settings -> SELECT.
Steps
-> Directory -> SELECT.
or
to browse through the directory, or press
/SPEAKER on the handset to call.
or
SELECT.
18
SELECT.
/SPEAKER or lift the
->
or
to