Surface Grates; Burner Size - Jenn-Air Dual Fuel Range User Manual

4. Replace the burner base. See the following illustration for
burner positions.
A
B
A. Small
B. X-Large
5. Replace the burner cap, making sure it is properly aligned with
the burner base. The burner cap should not rock or wobble
when properly aligned.
A. Incorrect
B. Correct
IMPORTANT: The bottom of the small and medium caps are
different. Do not put the wrong size burner cap on the burner
base.
Small cap Medium cap
6. Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, turn off the burner.
Do not service the burner yourself. Contact a trained repair
specialist.
D
C
E
C. Oval D. Medium
E. Large
A
B
Large cap X-Large cap

Surface Grates

The grates must be properly positioned before cooking. In the
proper position the grates should be flush and level. Improper
installation of the gates may result in chipping or scratching of the
cooktop.
To ensure proper positioning, align bumpers on grate bottom with
the indentations in the cooktop.
A
A. Bumpers
The surface grates interlock using the hooks on the middle grate
and the indents on the end grates. To remove the grates, remove
the end grates first, then remove the middle grate. To replace the
grates, replace the middle grate first, then place the end grates on
either side.
Although the burner grates are durable, they will gradually lose
their shine and/or discolor due to the high temperatures of the gas
flame.

Burner Size

Select a burner that best fits your cookware. See the following
illustration and chart.
Large
(most
powerful)
Burner Size Recommended Use
Small
Medium
Large
Large (most
powerful)
11
A
B
B. Alignment indentations
A
B
A. Indent
B. Hook
Low-heat cooking
Melting chocolate or butter
Multipurpose burner
For large cookware
For large cookware
Most powerful burner