Kodak DCS 300 Series User Manual page 71

Ps
MDE
FNC
SET
( ) +/- RESET
A confirmation screen appears.
6
Press and hold the SELECT
button and rotate the Main-
Command dial to highlight Yes
or No.
7
Release the SELECT button.
If you respond Yes, a second
confirmation screen appears.
8
Repeat steps 6 and 7.
If you respond Yes, a Formatting
Card screen appears briefly. It is
replaced by another Formatting
Card screen, but the new screen
has a Cancel button. When this
screen appears, the card has
been formatted (quick format)
and you can cancel at any time.
If you let the formatting process
run to completion (up to 15
minutes), a thorough format
with media verification occurs.
A progress bar
indicates the formatting status.
Pressing the Cancel button
terminates the thorough format,
although the PC Card will have
been formatted using quick
format.
Whether or not you cancel, a
BUSY
Format Complete screen will
appear.
The PC Card Busy/Record LED
stops blinking when formatting
has stopped.
4
4-5