Kodak DCS 300 Series User Manual page 228

Symptom
kLoginErr (-5693)
timeoutErr (-4162)
Error messages
appear on the
Macintosh
computer
screen when
the camera is
connected to
the computer
using IEEE
1394 cable.
disconnectedErr
(-4169)
B-6
Indication
Another application
is using the camera.
The camera failed to
respond to a
command within the
allotted time.
The camera has been
disconnected from
the computer and the
application is still
trying to
communicate with
the camera.
Cause
Quit any applications that
may be using the camera
(other than the one
intended for immediate
use).
Turn the camera Off then
On.
1
Turn the camera Off
then On.
2
If that doesn't work,
quit all applications.
Turn the computer and
camera Off then On.
3
If that doesn't work,
reload the firmware.
Refer to "Loading
Camera Firmware" on
page 11-11.
Quit the application
and restart.
If that doesn't work,
turn the computer and
camera Off then On.
Remedy