Kodak DCS 300 Series User Manual page 59

Specifying Whether the Antialiasing Filter is Installed or Removed
With the DCS 330 camera, you must set a camera property which will tell the Kodak
Software whether the antialiasing filter was installed or removed when an image was
captured. This information can determine whether the Kodak Software applies the
Sharpening feature, and the information is also used if the camera performs background
image processing to create a JPEG file. (This property is not available with the DCS 315
camera.)
The default setting is Installed. If you remove the antialiasing filter, you will need to set
the property to Removed. Refer to "Removing, Cleaning, and Re-installing the
Antialiasing Filter" on page 11-3.
For information on the Sharpening function, refer to the KODAK PROFESSIONAL DCS
Host Software User's manual on the DCS Host Software CD included with your camera.
1
With the Properties menu
displayed, select Antialiasing
Filter.
The Antialiasing Filter screen
appears.
2
Choose either Installed or
Removed depending on whether
your antialiasing filter is
currently installed.
3
3-5