Kodak DCS 300 Series User Manual page 224

Symptom
The Flash Ready
light is blinking.
The Battery icon in
Status screen
indicates
insufficient
or empty.
FEE
The shutter
doesn't release.
The Exposure mode
indicator and
blink.
buLb
Camera Status LCD
panel
FEE
blinking
The shutter
doesn't release.
B-2
Indication
Flash output may
have been
insufficient.
The battery is dead.
blinks A lens other than IX-
Nikkor lens is
attached but not set
to the smallest
aperture setting.
A non-CPU lens is
attached or no lens is
F--
attached.
Bulb is set in the
Shutter-Priority Auto
Exposure mode.
blinks in the
Auto Exposure
Bracketing was set
with a shutter speed
set at "Bulb".
blinks with a The Speedlight is not
, , or . set at TTL auto flash.
P Ps S
Cause
Refer to "TTL
Performance" on page 8-4.
Replace the batteries or use
the Kodak-specified AC
adapter. Refer to "Inserting
Batteries" on page 2-4 or
"Kodak-specified AC
adapter" on page 2-8.
Set the lens to the smallest
aperture. Refer to "Setting
the Lens to the Minimum
Aperture" on page 1-21.
Attach a Nikkor CPU lens.
Refer to "Mounting the
Lens" on page 1-19.
Set the Exposure mode to
Manual or set another
shutter speed. Refer to
"Manual Exposure Mode
(M)" on page 6-14.
To use Auto Exposure
Bracketing, select another
shutter speed. Refer to
"Auto Exposure
Bracketing" on page 7-9.
Set the Speedlight Flash
mode to TTL, or set the
camera's Exposure mode
to Aperture-Priority or
Manual.
Remedy