Installing The Camera Insert - Kodak EasyShare CX4310 User Manual

Installing the Camera Insert

Kodak EasyShare digital cameras are packaged with a custom camera insert,
which is used to perfectly fit the camera to the camera dock.
If You Do Not Have the Custom Insert
If you do not have the custom insert that was included with your camera, use
the universal insert that is included with the camera dock II. The universal
insert works with all Kodak EasyShare cameras, but it does not fit the cameras
perfectly.
To order a custom camera insert visit our Web site at
go/cx4310accessories.
54
Chapter 8
1
Place the front tabs on the custom insert
into the slots in the camera dock cavity.
2 Fit the insert down into the cavity and snap
the insert into place.
http://www.kodak.com/