Inserting An Sd/Mmc Card - Kodak EasyShare CX4310 User Manual

Inserting an SD/MMC Card

Optional SD/MMC cards provide removable, reusable storage for pictures.
CAUTION:
The card can only be inserted one way; forcing it may
damage the camera or card.
Do not insert or remove a card when the green ready light
is blinking; it may damage your pictures, card, or camera.
Notched
corner
See page 85 for storage capacities. Purchase SD/MMC cards at a dealer of
Kodak products or on our Web site at
cx4310accessories.
Chapter 1
1
Turn off the camera.
2 Open the card door.
3
Orient the card as shown.
4
Push the card into the slot to seat the
connector. (To remove the card, push it in,
then release it. When the card is partially
ejected, pull it out.)
5
Close the door.
http://www.kodak.com/go/
9