Setting The Clock - Kodak EasyShare CX4310 User Manual

Setting the Clock

The Date & Time screen appears the first time you turn on the camera or if the
battery is removed for an extended time. If this is the first time the camera has
been turned on, go to step 4.
To set the date and time after that:
OK
NOTE: Depending on your computer operating system, Kodak EasyShare
software may allow your computer to automatically update the camera
clock when you connect the camera. See the Kodak EasyShare software
Help for details.
Chapter 1
1 In Capture or Review mode, press the Menu
button.
2
Highlight Setup
button.
3 Highlight Date & Time
OK button.
The date format is YYYY/MM/DD in a 24-
hour format.
4
Press
Press
Menu
5
Press the OK button to accept the changes.
6
Press the Menu button to turn off the menu.
The setting remains until you change it.
, then press the OK
, then press the
to move through the fields.
to adjust the settings.
7