Setting Video Out - Kodak EasyShare CX4310 User Manual

Setting Video Out

The Video Out feature lets you match the camera's video signal to the standard
for your location. Video Out must be set correctly to run a slide show on an
external device (see
1
In Capture or Review mode, press the Menu button.
2
Highlight Setup
3 Highlight Video Out
44
Chapter 5
page 33).
, then press the OK button.
, then press the OK button.
4 Highlight an option:
NTSC—used in the United States and Japan
and most countries outside of Europe.
PAL—used in European countries.
5
Press the OK button to accept the change
and return to the Setup menu.
6 Press the Menu button to turn off the menu.
This setting remains until you change it.