Connecting The Camera Dock - Kodak EasyShare CX4310 User Manual

Connecting the Camera Dock

After the Kodak EasyShare software is loaded (see
camera dock to your computer and to an external power source. You will
need:
!
the USB cable included with your camera
!
the 7-volt AC adapter included with the camera dock
IMPORTANT: Make sure your camera is NOT in the camera dock
when you are connecting to power and the computer.
1
2
Leave the camera dock connected to the computer for easy access for
transferring pictures and charging the battery pack.
IMPORTANT: Use only the 7-volt AC adapter included with the
camera dock. Other adapters may cause damage to
your camera, camera dock, or computer.
Chapter 8
1 Plug the labeled (
into the labeled USB port on your computer.
See your computer User's Guide for details.
2
Plug the other end of the USB cable into the
square USB connector on the back of the
camera dock.
3
3
Plug the AC adapter into the round power
connector on the back of the camera dock
and into a power outlet.
Your AC adapter may be different from
the one pictured or may have additional
plugs. Use the plug that accommodates
your type of power outlet.
page 49), connect the
) end of the USB cable
55