Installing The Custom Camera Insert - Kodak EasyShare LS633 User Manual

Installing the Custom Camera Insert

A universal insert is pre-installed in the camera dock. It allows all Kodak
EasyShare CX/DX6000 series and LS600 series cameras to use the camera
dock.
A custom insert is included with your camera. It provides a perfect fit and
more stability for the Kodak EasyShare LS633 zoom digital camera.
Remove the Universal Insert
Install the Custom Insert
Cutout
Connector
70
Chapter 9
1 Place your thumbs against the front of the
universal insert. Press in and lift.
2
Lift the side edge of the insert, then remove
the insert from the dock.
3
Save the universal insert as a spare.
1
Position the custom insert so that the cutout
lines up with the camera dock connector.
2 Fit the insert into the groove in the dock.
Snap it into place.
NOTE: To order a custom insert for your
camera, visit
www.kodak.com/go/ls633accessories.