Installing The Custom Camera Insert - Kodak EasyShare CX6200 User Manual

Installing the Custom Camera Insert

A universal insert is pre-installed in the camera dock. It allows all Kodak
EasyShare CX/DX6000 series and LS600 series cameras to use the camera
dock.
A custom insert is included with your camera. It provides a perfect fit for
your Kodak EasyShare CX6200 digital camera.
Remove the Universal Insert
Install the Custom Insert
Cutout
Connector
64
Chapter 9
1 Place your thumbs in the indents in the
front of the universal insert; press in and
lift.
2
Lift the insert at the side edge and remove
the insert from the dock.
3
Save the universal insert as a spare.
1
Position the custom insert so the cutout
lines up with the connector on the camera
dock.
2
Fit the insert into the groove in the dock and
snap it into place.
You can purchase a custom insert for your
camera at dealer of Kodak products. See
www.kodak.com/go/cx6200accessories.