Fujitsu ETERNUS DX60 S3 Configuration Manual page 72

Chapter 5 General Settings
5.7 RAID Configuration Settings
The procedure to register a RAID group is as follows:
1
On the navigation of the ETERNUS Web GUI screen, click the [RAID Group] tab.
The [RAID Group] screen appears.
2
In [Action], click [Create].
The [Create RAID Group] screen appears.
3
Enter the name of the RAID group that is to be registered. Select "Manual" for "Create Mode".
4
Set the required items and click the [Create] button.
Name: RG0
Create Mode: Manual
RAID Level: High Capacity (RAID5)
Do Not
Do not uninstall the drives that are installed by default or move them to any other
•
slot.
Contact your sales representative or maintenance engineer if drives that are instal-
led by default need to be uninstalled or moved to another slot.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
72
P3AM-9002-01ENZ0