Fujitsu ETERNUS DX60 S3 Configuration Manual page 69

Chapter 5 General Settings
5.6 Firewall Settings
If both HTTP connection and HTTPS connection are disabled, the device is inaccessible via ETERNUS Web
•
GUI.
If both Telnet connection and SSH connection are disabled, the device is inaccessible via ETERNUS CLI.
•
• If the network environment for the MNT port is not set up, some functions will be unusable. Make sure
to set up the network environment.
1
Start the Web browser and log in to ETERNUS Web GUI with the IP address that is set in
"5.4 Storage Management (Initial Setup 1)" (page
2
Click the [System] tab on the navigation of the ETERNUS Web GUI screen.
3
In [Category], click [Network].
The [Network] screen appears.
4
Select the port to be set. In [Action], click [Setup Firewall].
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
62).
69
Step 6 in
P3AM-9002-01ENZ0