Chapter 5
General Settings
5.4
Storage Management (Initial Setup 1)
(2)
Click the [OK] button.
The name of the ETERNUS DX is set and the setting completion screen appears.
(3)
Click the [Done] button.
The [Change User Password] screen appears.
3
Changing user passwords
Change the user password.
(1)
Set the required items and click the [Next >>] button.
A confirmation screen appears.
(2)
Click the [OK] button.
The password is changed and the change completion screen appears.
(3)
Click the [Done] button.
The [Set Thin Provisioning] screen appears.
4
Thin Provisioning setup
Enable or disable the Thin Provisioning function and set the maximum pool capacity.
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
64
P3AM-9002-01ENZ0