Simulating Display Output
Commands or command output positioned to simulate displays of switch
information in a computer screen are printed in a monospace font.
Command Prompts
In the default configuration, your Series 4100GL switch displays one of the
following CLI prompts:
HP Procurve Switch 4104#
HP Procurve Switch 4108#
To simplify recognition, this guide uses HPswitch to represent command
prompts for all models. For example:
HPswitch#
(You can use the hostname command to change the text in the CLI prompt.)
Screen Simulations
Figures containing simulated screen text and command output look like this:
Figure 1.
Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear without figure iden-
tification. For example:
HPswitch(config)# clear public-key
HPswitch(config)# show ip client-public-key
show_client_public_key: cannot stat keyfile
Getting Started
Simulating Display Output
xix