Switch-To-Switch Download; Menu: Switch-To-Switch Download To Primary Flash - HP procurve series 4100gl Management And Configuration Manual

If you need information on primary/secondary flash memory and the boot
commands, see "Using Primary and Secondary Flash Image Options" on page
5-12.

Switch-to-Switch Download

You can use TFTP to transfer an OS image between two Series 4100GL
switchess. The menu interface enables you to transfer primary-to-primary or
secondary-to-primary. The CLI enables all combinations of flash location
options.

Menu: Switch-to-Switch Download to Primary Flash

Using the menu interface, you can download an OS from either the primary
or secondary flash of one Series 4100GL switches to the primary flash of
another Series 4100GL switches.
1. From the switch console Main Menu in the switch to receive the down-
load, select 7. Download OS screen.
Ensure that the Method parameter is set to TFTP (the default).
2.
3. In the TFTP Server field, enter the IP address of the remote Series 4100GL
switches containing the OS you want to download.
For the Remote File Name, enter one of the following:
4.
• To download the OS in the primary flash of the source switch, type
"flash" in lowercase characters.
• To download the OS in the secondary flash of the source switch, type
/os/secondary.
[X]
5. Press , then
[Enter]
6. A "progress" bar indicates the progress of the download. When the entire
operating system has been received, all activity on the switch halts and
the following messages appear:
Validating and writing system software to FLASH...
7. After the primary flash memory has been updated with the new operating
system, you must reboot the switch to implement the newly downloaded
OS. Return to the Main Menu and press
then see this prompt:
Continue reboot of system?
Press the space bar once to change No to Yes, then press
the reboot.
Downloading an Operating System (OS)
(for eXecute) to begin the OS download.
[6]
:
File Transfers
(for Reboot Switch). You will
No
to begin
[Enter]
A-9