HP procurve series 4100gl Management And Configuration Manual page 295

Figure 12-1. Example Listing of IGMP Configuration for All VLANs in the Switch
Viewing the Current IGMP Configuration. This command lists the IGMP
configuration for all VLANs configured on the switch or for a specific VLAN.
Syntax: show ip igmp config
show ip igmp vlan <vid> config
(For IGMP operating status, see "Internet Group Management Protocol
(IGMP) Status" on page B-19.)
For example, suppose you have the following VLAN and IGMP configurations
on the switch:
VLAN ID VLAN Name
1 DEFAULT_VLAN
22 VLAN-2
33 VLAN-3
You could use the CLI to display this data as follows:
The following version of the show ip igmp command includes the VLAN ID (vid)
designation, and combines the above data with the IGMP per-port configura-
tion:
Multimedia Traffic Control with IP Multicast (IGMP)
CLI: Configuring and Displaying IGMP
IGMP configuration for all
VLANs on the switch
IGMP configuration for a
specific VLAN on the switch,
including per-port data
IGMP Forward with
Enabled High Priority
Yes No
Yes Yes
No No
Querier
No
Yes
No
12-7