STAND-By button
①
Turn the projector off (p.24).
WIRED REMOTE jack
②
Connect the remote control cable (not supplied) to
this jack when using as a wired remote control.
SIGNAL EMISSION indicator
③
Light red while a signal is being sent from the
remote control to the projector.
ON button
④
Turn the projector on (p.23).
AUTO PC button
⑤
Automatically adjust the computer image to its
optimum setting (pp.29, 37).
INPUT button
⑥
Select a signal (pp.33-35).
MENU button
⑦
Open or close the On-Screen Menu (p.25).
SCREEN button
⑧
Select the screen size (p.29).
POINT
▲▼◄►
⑨
– Select an item or adjust the value in the On-
Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.43).
– Adjust the volume level (with Point
or mute the sound (with Point
Downloaded From projector-manual.com Sanyo Manuals
Remote Control
( VOLUME – / +, MUTE) buttons
buttons)
◄►
button.) (p.28).
▼
⑬
⑭
⑫
⑪
MOUSE POINTER button
⑩
Move a pointer of the projector or a pointer for
wireless mouse operation (p.32).
SELECT button
⑪
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.43).
SHUTTER button
⑫
Close and open up the built-in shutter (p.27).
INFO . button
⑬
Display the input source information (p.29).
L-CLICK button
⑭
Act as the left mouse button for wireless mouse
operation (p.32).
To ensure safe operation, observe the following
precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any other chemical
materials.
Part Names and Functions
1