Sanyo PLC-XM100 Owner's Manual page 14

Part Names and Functions
⑮
⑯
⑰
⑱
⑲
D .ZOOM button
⑮
Select the Digital zoom +/- mode and resize the
image (p.43).
INPUT 1-  buttons
⑯
Select an input source (INPUT 1 – INPUT 3)
(pp.33-35).
KEySTONE button
⑰
Correct keystone distortion (pp.31, 44, 50).
ZOOM ▲▼ buttons
⑱
Zoom in and out the images (p.29).
FOCUS buttons
⑲
Adjust the focus (p.29).
RESET/ON/ALL-OFF switch
⑳
When using the remote control, set this switch to
"ON". Set it to "ALL OFF" for power saving when
it is not in use. Slide this switch to "RESET" to
initialize the remote control code.
FILTER button
㉑
Scroll the filter (p.30).
LENS SHIFT button
㉒
Select the Lens Shift function (p.29).
14
Downloaded From projector-manual.com Sanyo Manuals
Remote Control
㉖
㉕
㉔
㉓
㉒
㉑
⑳
FREEZE button
㉓
Freeze the picture on the screen (p.30).
P-TIMER button
㉔
Operate the P-timer function (p.30).
R-CLICK button
㉕
Act as the right mouse button for wireless mouse
operation (p.32).
POINTER button
㉖
Act as the On-Off switch for the Pointer (pp.30, 32).
NUMBER buttons
㉗
Act as number buttons. Use these buttons when
setting the remote control codes (p.16) or when
entering the PIN code numbers (pp. 23, 54, 60).
㉗
For PIN code
and remote
control code.