Sanyo PLC-XM100 Owner's Manual page 30

Basic Operation
MOUSE POINTER button
Move the pointer on the screen with this button.
POINTER button
Press POINTER button on the remote control to display the Pointer
on the screen.
P-TIMER button
Press the P-TIMER button on the remote control to operate the
Count up/Count down function. Refer to p.58 for detail of Setting for
the P-timer function.
To stop the count time, press the P-TIMER button.
To cancel the P-timer function, press and hold the P-TIMER button.
FREEZE button
Press the FREEZE button on the remote control to freeze the
picture on the screen. To cancel the FREEZE function, press the
FREEZE button again or press any other button.
Fig.1 will appear when the Freeze function is working.
Fig.1
FILTER button
Press and hold the FILTER button for more than five seconds to
operate electrically operated filter to replace the filter.

Note:
• The filter cannot be rewound.
• When the filter is replaced, the total accumulated time of the filter use is
automatically set to 0.
0
Downloaded From projector-manual.com Sanyo Manuals
Remote Control

Note:
See the previous page for the description of
other buttons.
MOUSE
POINTER button
POINTER button
P-TIMER button
FREEZE button
FILTER button