Installation; Positioning The Projector; Lens Shift Adjustment; Lens Shift Adjustable Range - Sanyo PLC-XM100 Owner's Manual

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen.
 Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function
makes the positioning of images easy on the screen. (See page 27)
The display position
can be shifted upward
up to 50% elevation of
the display.
When the lens is shifted to top.
The display position can
be shifted to the left in
up to 10% width of the
display.
When the lens is shifted to leftmost.
Downloaded From projector-manual.com Sanyo Manuals

Positioning the Projector

33.1'(10.11 m)
22.0' (6.73 m)
16.5' (5.03 m)
10.9' (3.34 m)
4.3'(1.30 m)
100"
59"
40"
Screen Size
40"
(W x H) mm
610 x 457
4:3 aspect ratio
4.3'(1.30 m)
Zoom (max.)
7.4'(2.26 m)
Zoom (min.)

Lens Shift Adjustment

The display position can
be shifted downward up
to 50% low level of the
display.
When the lens is shifted to bottom.
When the lens is shifted to rightmost.

Installation

56.5' (17.23 m)
200"
150"
118"
89"
100" 150"
2032 x 1524 3048 x 2286 4064 x 3048
10.9' (3.34 m) 22.1' (6.73 m)
16.5' (5.03 m)
18.7' (5.71 m) 28.2' (8.59 m)
37.6' (11.47 m)

Lens shift adjustable range

The display position can
be shifted to the right in
up to 10% width of the
display.
(Inch Diagonal)
300"
Max. Zoom
300"
Min. Zoom
177"
(Center)
200" 300"
6096 x 4572
33.1'(10.11 m)
56.5' (17.23 m)
50%
10%
Shift range
Lens shift center position
17