Sanyo PLC-XM100 Owner's Manual page 61

Shutter
Shutter function is available to block out light to the screen, so that
the screen can be used for the other presenters.
Protection
Prohibit the shutter operation from the remote control and the
projector's side control.
Remote control . . Selecting On prohibits the shutter
Projector . . . .
It is possible to prohibit the shutter operation from both of the
remote control and the side control.
Management
The Shutter Management function turns off the projection lamp
when the projector is left with the shutter closed and the set time
has passed away. The count-down time can be set between 5 and
180 minutes. When the count-down time has elapsed, the shutter
will be opened up automatically and the lamp will be turned off to
cool itself down. The SHUTTER indicator is blinking blue and red
during this cooling-off period. When the lamp has been fully cooled
down, the POWER indicator turns green lighting and the SHUTTER
indicator keeps blinking. Should the ON / STAND-BY button be
pressed in this condition, the projection lamp will be turned on and
the SHUTTER indicator lights dim red.
Note:
T he Shutter Management function cannot be halted.
Video delay control
Press the SELECT at Video delay control, and then use the Point
▲▼ buttons to change Off/Low/Mid/High.
Off . . . . . . . . Video delay control function is Off.
Low . . . . . . . . Keystone function is disable and Video delay
Mid . . . . . . Progressive and Noise reduction functions are
High . . . . . . . . Keystone, Progressive and Noise reduction
Note:
W hen Video delay control function is set to Low or High and press the
KEYSTION button on the remote control, Fig.1 will be dispalyed on the
bottom left screen.
Downloaded From projector-manual.com Sanyo Manuals
operation from the remote control.
Selecting On prohibits the shutter
operation from the side control.
control will be working via the low mode.
disable and Video delay control will be working
via the Mid mode.
functions are disable and Video delay control will
be working via the High mode.
Shutter
Standby mode
On start
Pointer
P-Timer
Security
Shutter
Video delay control
Filter counter
Test pattern
Factory default
Shutter
Protection
Projector
Remote control
Management
Fig .1
Setting
Network
On
Dot
Off
Off
Off
180 Min
61