Specifications; Placement Of The Oven; Do Not Block Air Vents; Location Of Model Number - Jenn-Air JES8750BA Series Service Manual

Electric slide-in range
Hide thumbs Also See for JES8750BA Series:
Table of Contents

Advertisement

General Information

Specifications

Refer to individual Technical Sheet for specification
information.

Placement of the Oven

This freestanding range must be placed in the kitchen or
comparable room. All safety guidelines must be followed
and free air flow around the range is essential.

Do Not Block Air Vents

All air vents must be kept clear during cooking. If air
vents are covered during operation, the oven may
overheat. If this occurs, a sensitive, thermal safety device
automatically removes power to the oven, rendering the
oven inoperable. The oven will remain in this state until it
has sufficiently cooled.

Location of Model Number

To request service information or replacement parts, the
service center will require the complete model, serial, and
manufacturing number of your slide-in range. The
number can be found on the oven chassis behind the
front Access Panel or behind the Warming Drawer along
the front frame. Remove the front Access Panel or pull
out the Warming Drawer to view the data.
Model Number
Access Panel

Grounding Instructions

This appliance must be grounded. If an electrical short
circuit occurs, grounding reduces the risk of electric
shock by providing an escape wire for the electric current.
The cord for this appliance has a grounding wire with a
grounding plug. Put the plug into an outlet that is properly
installed and grounded.
!
W AR NIN G
To avoid risk of electric shock, personal injury or death,
use grounding plug properly.
Ask a qualified electrician if you do not understand the
grounding instructions or if you have questions when
grounding the appliance. Keep the electrical power cord
dry and keep it from getting crushed or pinched.
8
For a permanently connected appliance: This
appliancemust be connected to a grounded, metallic,
permanent wiring system, or an equipment grounding
conductor should be run with the circuit conductors and
connected to the equipment grounding terminal or lead
on the appliance.

Model Identification

Complete enclosed registration card and promptly return.
If registration card is missing:
• For Jenn-Air product call 1-800-536-6247 or visit the
Web Site at www.jennair.com
• For Maytag product call 1-800-688-9900 or visit the
Web Site at www.jennair.com
• For Amana product call 1-800-843-0304 or visit the
Web Site at www.jennair.com
• For product inCanada call 1-800-688-2002.
When contacting provide product information located on
rating plate. Record the following:
Model Number:
Manufacturing Number:
Serial or S/N Number:
Date of purchase:
Dealer's name and address:

Service

Keep a copy of sales receipt for future reference or in
case warranty service is required. To locate an authorized
servicer:
• For Jenn-Air/Maytag product call 1-800-462-9824 or
visit the Web Sites at www.jennair.com or
www.maytag.com
• For Amana product call 1-800-628-5782 or visit the
Web Site at www.amana.com
• For product inCanada call 1-800-688-2002.
Warranty service must be performed by an authorized
servicer. We also recommend contacting an authorized
servicer, if service is required after warranty expires.

Parts and Accessories

Purchase replacement parts and accessories over the
phone. To order accessories for your product call:
• For Jenn-Air product call 1-800-536-6247 or visit the
Web Site at www.jennair.com
• For Maytag product call 1-800-688-9900 or visit the
Web Site at www.jennair.com
• For Amana product call 1-800-843-0304 or visit the
Web Site at www.jennair.com
• For product inCanada call 1-800-688-2002.

Extended Service Plan

We offer long-term service protection for this new oven.
• Asure™ Extended Service Plan is specially designed
to supplement Maytag and Amana's strong warranties.
These plans cover parts, labor, and travel charges.
Call 1-866-232-6244 for information.
• Dependability Plus
specially designed to supplement Jenn-Air's strong
warranty. This plan covers parts, labor, and travel
charges. Call 1-800-925-2020 for information.
16026926
___________________
___________________
___________________
___________________
___________________
Extended Service Plan is
SM
© 2006 Maytag Services

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents