Specifications - Escort 3136A Operation Manual

A-1 Introduction
Appendix A describes the complete specifications of this meter.
A-2 Technical Specifications
Specifications assumptions:
• One-year calibration cycle.
• Operating temperature at 18°C to 28°C (64.4°F to 82.4°F).
• Accuracy is expressed as: ± (% of reading + digits) after 30 minutes warm-up.
• Temperature coefficient: Add ± [0.15 x (the applicable accuracy)/°C] for 0°C
to 18°C and 28°C to 50°C.
• Relative Humidity (RH): up to 80% (60% for 50MΩ range of resistance
measurement).
• All specifications are specified under single display mode in operation only.
Display Counts and Reading Rates
Full Scale Display Counts: 51,000 Counts
Reading Rate (Approx.)
Measuring Function
DCV
DCA
Diode
ACV
ACA
Ω
Frequency/ACV or ACA
ACV+DCV
ACA+DCA
DCV / ACV
ACV+DCV / DCV
ACV+DCV / ACV
Notes:
1. The reading rate is measured as above combinations and applications at lock range.
2. Using RS-232 or GPIB remote interface, the reading rate is similar to normal mode.
Readings/Sec Measuring Function
3 DCV / Frequency
3 ACV / Frequency
3 ACV+DCV / Frequency
3 DCA / ACA
3 ACA+DCA / DCA
3 ACA+DCA / ACA
2/3 DCA / Frequency
1.3 ACA / Frequency
1.3 ACA+DCA / Frequency
1.3 dBm / DCV
1.3 dBm / ACV
1.3 dBm / ACV+DCV
93
Appendix A

Specifications

Readings/Sec
1.3/2
1.3/2
1.3/2
1.3/2
3/2
1.3
1.3
1.3
3/2
3
3
1.3