Measuring Resistance - Escort 3136A Operation Manual

4-3

Measuring Resistance

1. Connect a resistor under test to
below:
Do not apply a voltage exceeding 500 V peak between
2.
3.
primary display.
Note: When measuring low resistance, use "REL" modifier function to reduce the
measuring error created by the test leads resistance and contact resistance in
the test loop (0.1
to select Ω measurement.
, or to select auto-ranging or manual range for
Ω Ω
~ 0.5 typical).
and COM input terminals as shown
WARNING!
and COM input terminals.
45
POWER