Escort 3136A Operation Manual page 61

Table 6-7. Descriptions for SHL Command
Syntax
SHL<m><s><nnnnn> SHL command is used to set high or low limit in counts for
Example 1: "SHL1+10234"
Range High limit to be
1000.0 V
500.00V
50.000V
Example 2: "SHL0-09876"
Range Low limit to be
1000.0 V
500.00V
50.000V
compare function.
<m> is a necessary parameter for specifying the high or low limit.
numeric number "0" is to set low limit, "1" is to set high limit.
<s> is a sign symbol for the limit, can be set as "+" or "-".
<nnnnn> is a five-digit decimal number from "00000" to "50000".
+1023.4V
+102.34V
+10.234 V
- 0987.6V
- 098.76V
- 09.876 V
Description
57