Escort 3136A Operation Manual page 92

Command
CALCulate
:DBM
:IMPedance
[:STAT]
:LIMit
:FAIL?
:LOWer[:DATA]
[:STAT]
:UPPer[:DATA]
:RECord
:MAXimum
:MINimum
:MINMAX
:OFF
:RELative
[:STAT]
:PERcentage
[:STAT]
:MODE?
INITiate[IMMediate]
:CONTinuous
:CONTinuous?
TRIGger
:SOURce
:SOURce?
MEASure?
READ?
READ??
SYSTem
:ERRor?
:VERSion?
Note:
"Std" commands means defined in SCPI standard and "New" commands are not
defined.
Parameter Std/New
<reference>
<Boolean>
<number value>
<Boolean>
<number value>
<Boolean>
<Boolean>
<Boolean>
<BUS|IMM>
[[,@1]|,@2]
88
Std Set the calculation function.
New Set dBm reference impedance
New
New
Std Set and query the comparator.
Std
Std
New
Std
New Set the dynamic recording mode.
New
New
New
New Turn off recording mode
New
New
New
New
New Query the calculation function.
Std Reset meter without changing setup
Set the meter at free run or data hold operation
Std
mode.
New Query the operation mode.
Std Trigger function
Std Select a trigger source.
Std Query the trigger source type.
Std Trigger and get measuring value.
Std Read the display value.
New Read the both display values.
Std Subsystem
Std Read the error message.
Std Return the firmware version.
Explanation