How To Fold And Move The Treadmill - ProForm PRO 2000 User Manual

Pftl13113.0
Hide thumbs Also See for PRO 2000:
Table of Contents

Advertisement

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL
To avoid damaging the treadmill, adjust the incline
to zero before you fold the treadmill. Then, remove
the key and unplug the power cord. CAUTION: You
must be able to safely lift 45 lbs. (20 kg) to raise,
lower, or move the treadmill.
1. Hold the metal frame firmly in the location shown
by the arrow below. CAUTION: Do not hold the
frame by the plastic foot rails. Bend your legs
and keep your back straight.
1
Frame
2. Raise the frame until the storage latch locks in the
storage position. CAUTION: Make sure that the
storage latch locks.
2
Latch
To protect the floor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight.
Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
Frame
HOW TO MOVE THE TREADMILL
Before moving the treadmill, fold it as described at the
left. CAUTION: Make sure that the storage latch is
locked in the storage position. Moving the treadmill
may require two people.
1. Hold the handrails with both hands and care-
fully push the treadmill to the desired location.
CAUTION: Do not pull on the frame, and do not
move the treadmill over an uneven surface.
1
Handrail
Wheel
HOW TO LOWER THE TREADMILL FOR USE
1. Press on the
upper end of the
treadmill frame
with your hands,
press the storage
latch with your
foot in the loca-
tion shown, and
then allow the
frame to lower to
the floor.
26
Wheel
1
Storage
Latch

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pftl13113.0

Table of Contents