NOTE
For details on the procedure for installing the software when installing the optional
•
network board and connecting the printer to the computer with LAN, see "Network
Guide".
For details on the procedure for installing the software when sharing this printer on a
•
network and printing from a computer on the network, see "Printing from a Network
Computer by Sharing the Printer on a Network," on p. 3-55.
If the print server is running 64-bit Windows Vista, and if you want to update the
•
additional driver (alternate driver), perform the following procedure.
1. Uninstall the printer driver used in the print server. (See p. 3-81)
2. Install the new printer driver on the print server. (See p. 3-4)
3. See "Print Server Settings" (p. 3-56) and install the additional driver again.
When you connect this printer to your computer with a USB cable, use the supplied USB
•
cable or a USB cable with the following symbol.
Installing from CD-ROM Setup
The screen shots used in this section are from Windows XP.
IMPORTANT
When starting Windows, be sure to log on as a member of Administrators.
1
Make sure that the printer and computer are OFF.
2
Connect the B-type (square) end of the USB cable to the USB
connector on the printer.
Installing the CAPT Software
3
3-5