Connect The Usb Cable - Canon Laser Shot LPB3500 User Manual

IMPORTANT
If the duplex unit is not installed on the printer firmly (if there is any space between the rear of
the printer and the duplex unit), this may result in misfeeds.
5
Connect the interface cables except for the USB cable, and
connect the power cord.
6
Plug the power plug into the AC power outlet.
7

Connect the USB cable.

NOTE
After installing the duplex unit, you have to specify the settings for the optional
accessories in the [Device Settings] sheet in the printer driver. You can obtain the
status of the optional accessories automatically by clicking [Get Device Status] in
the [Device Settings] sheet.
Duplex Unit 6-27
6