Canon Laser Shot LPB3500 User Manual page 246

Setting/Button
[Detect Paper Size in
Multi-purpose Tray]
[Rotate Print Data 180 Degrees]
(See p. 4-58)
[Use Skip Blank Pages Mode]
[Reverse Output Order When
Using Sub-output Tray]
[Advanced Settings]
Contents
If the check box for this option is selected, a message
is displayed, and the job is paused when the setting
for [Output Size] in the [Page Setup] sheet is different
from that for the previous job.
When printing on paper of the size specified in
[Output Size], load the appropriate paper in the
multi-purpose tray. When printing on the currently
loaded paper, click the [Resolve Error] button.
However, the following jobs use the currently loaded
paper without displaying a message regardless of the
setting for [Output Size].
- A job that takes place immediately after turning the
power ON/OFF
- A job that takes place immediately after resuming
from the sleep mode
- A job that takes place immediately after reloading
paper
If this check box is cleared, the job uses the currently
loaded paper without displaying a message even if
the settings for the paper size are different from each
other. (However, printing speed may drop.)
Prints with the image 180 degrees rotated.
This option is useful for printing envelopes and Index
Card size media that can be fed only in specific
orientations.
When the check box for this option is selected, blank
paper is not output if the job includes blank pages.
Paper is output to the sub-output tray with the printed
side facing up. Therefore, when printing from the first
page, the paper is stacked with the page order
reversed. If the check box for this option is selected,
you can output paper with the pages collated in the
right order because the printer prints from the last
page.
Allows you to specify the settings in the [Advanced
Settings] dialog box when you want to print jagged
lines of text and graphics smoothly, specify whether to
print the last page in the 1-sided mode on 2-sided
printing, etc. Also, if you are using Windows 2000/XP/
Server 2003, you can specify whether the print data is
spooled in EMF (meta file) format.
Using the Various Printing Functions
4
4-33