Display Assembly - HP Pavilion dv9000 Maintenance And Service Manual

Display assembly

Description
17.0-inch, SXGA+, TFT, single lamp, BrightView display assembly for use only with computer models
equipped with a camera (includes wireless antenna transceivers and cables)
17.0-inch, WXGA+, TFT, single lamp, BrightView display assembly for use only with computer models
equipped with a camera (includes wireless antenna transceivers and cables)
17.0-inch, SXGA+, TFT, single lamp, BrightView display assembly for use only with not equipped with
a camera (includes wireless antenna transceivers and cables)
17.0-inch, WXGA+, TFT, single lamp, BrightView display assembly for use only with not equipped
with a camera (includes wireless antenna transceivers and cables)
Before removing the display assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the memory/WLAN module compartment cover (see
5.
Disconnect the wireless antenna cables from the WLAN module (see
6.
Remove the following components:
7.
Switch cover (see
a.
Keyboard (see
b.
Speaker assembly (see
c.
Remove the display assembly:
Close the computer and turn it upside down, with the front toward you.
1.
62 Chapter 4 Removal and replacement procedures
Battery on page 40).
Switch cover on page
Keyboard on page 56)
Speaker assembly on page
Memory module on page
54)
59)
Spare part number
447990-001
447989-001
447993-001
447992-001
47).
WLAN module on page
ENWW
50).