HP Pavilion dv9000 Maintenance And Service Manual page 89

Remove the top cover trim:
Turn the computer upside down with the front toward you.
1.
Remove the four Phillips PM2.5×8.0 screws that secure the top cover trim to the computer.
2.
Turn the computer right-side up with the front toward you.
3.
Remove the Phillips PM2.5×8.0 screw (1) that secures the top cover trim to the computer.
4.
Remove the top cover trim (2).
5.
Remove the top cover trim.
6.
Reverse this procedure to install the top cover trim.
ENWW Component replacement procedures 81