Creating An Administrator Password For The Embedded Web Server; Creating E-Mail Alerts - Lexmark X560n User Manual

Creating an administrator password for the
Embedded Web Server
1
Open a Web browser.
2
In the address bar, type the IP address of the printer, and then press Enter.
If the Java applet screen appears, click Yes.
3
Click Properties.
4
Under Security, click Administrator Security Settings.
5
Select the Enable Administrator Mode check box.
6
Fill in the log-in information:
a
In the User Name field, enter the log-in name for the administrator.
b
In the Password field, enter the log-in password.
c
In the Verify Password field, re-enter the log-in password.
7
Click Save Changes. The new password has been set and anyone with the administrator name and password
can log in and make changes to the printer configuration and settings.

Creating e-mail alerts

Note: In order to use this function, Email Server (SMTP) must be configured from the Embedded Web Server.
When connected to a network environment in which sending and receiving of e-mail is possible, the printer can send
an e-mail report to specified e-mail addresses containing the following information:
•
Network settings and the printer status
•
Status of errors which have occurred on the printer
To set up e-mail alerts for this printer:
1
Open a Web browser.
2
In the address bar, type the IP address of the printer, and then press Enter.
If the Java applet screen appears, click Yes.
3
Click Properties.
4
Click Mail Alerts.
5
Select the Enable Mail Alerts check box.
6
Fill in the Mail Address fields with the desired e-mail addresses.
7
Click the Notification Items you want to include in the e-mail message.
8
Click Save Changes.
Downloaded From ManualsPrinter.com Manuals
Administrative support
172