Paper And Specialty Media Guide; Paper Guidelines; Paper Characteristics; Moisture Content - Lexmark X560n User Manual

Paper and specialty media guide

Paper guidelines

When printing on specialty media, use the printer control panel to set the correct Paper Type.

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating
new paper stock.
Weight
2
The printer can automatically feed paper weights from 60 to 176 g/m (16 to 47 lb bond) grain long. Paper lighter
2 2
than 60 g/m (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 90 g/m
2
(24 lb bond) grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 in.), we recommend 90 g/m or heavier
paper.
Curl
Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur
after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in
hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause
feeding problems.
Smoothness
Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too
smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points;
however, smoothness between 150 and 200 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly.
Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that
can degrade its performance.
Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24 to
48 hours before printing. Extend the time several days if the storage or transportation environment is very different
from the printer environment. Thick paper may also require a longer conditioning period.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of
the paper, or grain short, running the width of the paper.
2
For 60 to 90 g/m (16 to 24 lb bond) paper, use grain long fibers.
Paper and specialty media guide
48
Downloaded From ManualsPrinter.com Manuals