Cone Assembly Key Parts; Cone Assembly Parts - Tandon TM848-1 Operating And Service Manual

CONE BRACKET
SCREW
CONE ALIGNMENT ARM
CONE ASSY
Figure 5-4
Cone Assembly Key Parts
D. Latch the diskette lever.
!
E-RING & WASHER
WAVE WASHER
E. Insert the screw that attaches the cone bracket to the cone alignment arm(see Figure 5-5).
t E-RING
~ ~-~-------
~i=c::::::l""""------
FLAT WASHER
~i~""""
WAVE WASHER
I:~f?:t"tj:@~ ?]f!M,j~A~tfrJ!
.....
o 1 ( f - - - - - -
CONE BRACKET
FLAT WASHER (2)
Figure 5-5
Cone Assembly Parts
5.4.3 Checks
A. Ensure that the Cone Assembly turns freely.
B. If not, reverify that the Cone Assembly has been installed correctly.
C. Insert a diskette.
D. Ensure that the diskette is clamped properly by the cone.
5-5