Transmitting A Status - Icom IC-F5060 Series Operating Manual

■ Transmitting a status

D General
The programmed status message can be selected, and the
message text is also displayed on the function display of the
called station.
Up to 24 status types (1 to 24) are selectable, and status
messages 22 and 24 have designated meanings.
Status 22: Emergency*
Status 24: GPS request
* Status 22 can also be used as a normal status message by disa-
bling the designated meaning. However, the status 24 meaning
is fixed.
A status call can be sent with both individual and group
calls.
BIIS 1200 OPERATION
D Transmitting a status
q While in the standby mode, push [BIIS Button], then push
[CH Up] or [CH Down] to select the desired station/group
code.
w Push [BIIS Button] again, then push [CH Up] or
[CH Down] to select the desired status message.
S T A T U S
T X S t a t u s
Status message is displayed.
e Push [Call] or [PTT]* to transmit the status message to
the selected station or group.
* A PTT call can be made only when PTT call capability is permit-
ted.
• When the transmission is successful, 2 beeps sound and the
transceiver automatically returns to the standby mode.
2
0 1
0 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
10