IBM 3151 Manual To Operations page 93

Operator Messages
Area Message Meaning Action
6 DRAWl Shows that line-drawing To exit this mode, press
mode is selected when
the Line Draw key again.
the Line Draw key is
pressed.
NUM2
Shows that numeric lock To exit this mode, press
mode is selected when the Num Lock key again.
the Num Lock key is
pressed.
7 TRACEI
Shows that trace mode is To exit this mode, press
selected when the Trace the Trace key again.
key is pressed or when
the Trace On command
is received.
PROTECT3
Shows that the display None.
station is operating in
protect mode.
8 (xxx,yyy)
xxx and
yyy
indicate the None.
row and column
addresses of the cursor,
respectively.
Figure 4-2 (Part 10 of 10). Operator Messages
This message does not appear in Ten ASCII terminals emulation mode.
2
This message appears in IBM 3151 mode of IBM 3151 Model 11 only.
This message does not appear in IBM 3151 and IBM 3101 modes.
4-12
IBM 31~ 1 Guide to Operations