Defining Setup Values - IBM 3151 Manual To Operations

Defining Setup Values
Defining Setup Values
You must define the setup values so that the display station can correctly
communicate with the host system or printer. The person responsible for setting
up the display station should have selected the values for your installation. Get
the setup sheet from that person and refer to it and do the following steps.,
If you are the person responsible for setting up the display station you must
define the setup values, see "Setup Menus and Setup Value Description"s" on
page 2-17 for more infomlation.
Set the power switch to I (On).
a
The
GENERAL
menu will appear as shown below"
Note: If you have already defined the setup values, the
GENERAL
menu will
not appear. In this case, press and hold the Ctrl key; then press the Setup key.
SET U P M·E N U
COMMUNICATION KEYBOARD/PRINTER FUNCTION
Machine Mode
Screen
Rowand Column
Scroll
Auto LF
,CRT Saver
Line Wrap
NORMAL
24x 80
JUMP
ON
OFF
ON
Forcing Insert
Tab
Term. 10
OFF
FIELD
2-14
IBM 3'151 Guide to Operations