IBM 3151 Manual To Operations page 77

Keyboard Functions
KEY
Send Line
: Send ;
; Line :
Send Message
Setup
Shift
FUNCTION
In block mode, the display station sends the contents of the current
line to the host system when
PAGE
is selected; or sends the contents of
the current page to the host system when
LINE
is selected for the Send
option. The data to be sent depends on the Send Data Format
option.
In character or echo mode, the display station does not perform the
above function, but sends the key code to the host system.
In block mode, the display station sends data from the line below the
send mark ( • ) to the cursor position to the host system. The send
mark can be specified by pressing the
ESC
key; then pressing the
E
key while holding down the Shift key. If no send mark is specified,
data from the top of the screen to the cursor position is sent. The
data to be sent depends on the Send Data Format option.
In character or echo mode, the display station does not perform the
above function, but sends the key code to the host system.
Enters setup mode to define the setup values. See "Defining Setup
Values" on page 2-14 for more informati~n.
Enables keyboard up-shift.
3-14
IB~ J151
Guide to Operations