Selecting Values - IBM 3151 Manual To Operations

How to Define Setup Values
Selecting Values in the Fields
You can select a value for any field using the Space Bar. Press the Space Bar
until the desired value appears. You only key in characters when defining the
terminal ID (identification). When the Space Bar is pressed while holding down
the Shift key, you can select the previous value. If you try to key in characters in
any other field, the audible alarm will sound.
o DODD DODD DODD
eag~
c=JOOOOODoODOc:=J
o
0 CJ 0
i
Space Bar
ODD
BBB
o
DOD
0000
8BBB
0000
CJo
Using Space Bar
Figure 2-3. Selecting Values
2-20
IBM 3151 ,Guide to Operations