Mercedes-Benz COMAND Operating Instructions Manual page 77

Selecting a point of interest
Requirement for "Calling a POI": a mobile
phone is connected to COMAND
( page 104).
Y
Requirements for "Viewing the vicinity of the
destination" and "Loading data from the Inter-
net": mbrace must be activated for Internet
access ( page 136).
Y
The complete address of the POI is shown.
Viewing the vicinity of the destination
To select symbol :: turn the controller and
X
press to confirm.
If street images are available, the street in
the vicinity of the destination address is
shown.
Calling up the map
Select Map Map.
X
Move the map, change the map scale and
X
select the POI ( page 75).
Y
Calling up the POI
Select Call. Call
X
If a telephone number is available,
COMAND switches to the telephone func-
tion.
Loading data from the Internet
Select www www.
X
If an Internet address is available, data is
loaded from the Internet.
Saving a POI
To select Save Save: turn and press the control-
X
ler.
The POI can be saved as:
Destination input
a navigable contact in the address book
R
My Address
R
Starting route calculation
To select Continue Continue: press the controller.
X
Using Map
Crosshair
:
Distance of crosshair position from cur-
;
rent vehicle position
To switch to navigation mode: press the
X
ß button.
To show the menu: slide 6 the control-
X
ler.
To select Destination: turn and press the Destination
X
controller.
Select Using Map Using Map.
X
The map with crosshair is shown.
To move the map: slide 1, 4 or
X
2 the controller.
To change the map scale: turn the con-
X
troller until the desired map scale is
selected.
The scale is displayed at the bottom. Turn-
ing clockwise zooms out from the map;
turning counter-clockwise zooms in.
75
Z