Mercedes-Benz COMAND Operating Instructions Manual page 28

Basic functions
26
Call up quick access (
X
The current audio source is displayed.
To display the available audio sources:
X
glide down with one finger.
To select an audio source: glide your finger
X
to the left or right and press.
The selected audio source is played.
Sending DTMF tones
The function is not supported by all mobile
phones (see the manufacturer's operating
instructions).
Call up quick access during a call
X
( page 22).
Y
To select the desired characters: glide to
X
the left or right respectively and press.
Every character selected will be transmit-
ted immediately.
Basic functions
Switching COMAND on/off
Press the u button on the center con-
X
sole to the right of the controller.
When you switch on COMAND, a warning
message will appear. COMAND calls up the
previously selected menu.
If you switch off COMAND, playback of the
current media source will also be switched
off.
page 22).
Y
Adjusting the volume
Adjusting the volume for media sources
Turn the thumbwheel to the right of the
X
controller.
or
Press the W or X button on the mul-
X
tifunction steering wheel.
The volume of the media source currently
selected changes.
Adjusting the volume for traffic
announcements and navigation
announcements
During traffic or navigation announcements:
Turn the thumbwheel to the right of the
X
controller.
or
Press the W or X button on the mul-
X
tifunction steering wheel.
i
You can set the volume for navigation
announcements to be different from the
volume of the respective media source.
Adjusting the volume for phone calls
You can adjust the volume for hands-free
mode during a telephone call.
Turn the thumbwheel to the right of the
X
controller.
or
Press the W or X button on the mul-
X
tifunction steering wheel.
i
Setting the volume for the Voice Control
System voice output, see the separate
operating instructions.